7 Series TTV

7250 - Cutting Edge Technology

Success is achieved by enterprises that are able to tackle every task throughout the season using the lowest possible amount of resources and being effective with the time available.
Equally, every penny counts when it comes to reducing production costs. DEUTZ-FAHR has developed the 7 TTV Series for such businesses.
The 7 TTV Agrotron delivers 246 HP and stand out for a range of trademark German characteristics: high quality, high precision and reliability combined with cutting-edge technology in terms of both cost-effectiveness and comfort. 

The TTV Agrotron represents the culmination of highly innovative and intelligent tractor technology manufactured at our new facility in Lauingen, Germany, offering the exceptional comfort of the MaxiVision 2 cab, intuitive controls, a newly designed armrest, state-of-the-art precision farming systems, highly efficient engine and transmission technology, innovative axles and brakes which ensure optimal driving comfort and maximum safety. 

Furthermore, the hydraulic systems and lift capacity both front and rear, compliment the overall 7 TTV Series specification making this tractor the ideal partner for increasing the productivity of professional contractors and agricultural businesses – both in the field and on the road. 






3 Driving Modes

The overall target of DEUTZ-FAHR is its easy, efficient driveability. The TTV transmission can be driven after seconds of sitting in the seat. Three driving strategies are available with Manual, Auto and PTO. Manual is like driving normal gearbox tractor however the smart modes are Auto and PTO. Auto is used in tillage application where you can set the desired speed and the engine revs will adjust automatically depending on load. PTO mode is used for any PTO work, the engine revs are always constant and vehicle speed can be adjusted by the operator. This transmission is simple and easy to use.


Heavy Duty Rear Hitch

Designed for strength, stability and versatility the 3 point hitch have a maximum lifting capacity of 10,000 kg. The 7 Series TTV can carry the heaviest implements. The rear hydraulic system is standard with CAT 3 hook ends, automatic stabilisers, wheel slip control (RADAR) and external controls for raise and lower. Inside the cabin the linkage can be set to the task at hand with easy to use controls.

MaxCom Armrest Control

The new MaxCom2 armrest gives the driver the feeling of full control of operation. It collects all important work operations and offers the best tractor operation in the market. Compared to the previous Series, The new option of the position controlled front lift is adding the potentiometer of lowering speed and maximum lifting height in the front. This makes the system fully useable for all implements, like mowers and power harrows. On the armrest the Deutz Fahr colour logic system is used; Orange (Driving), Green (Linkage), Blue (Aux Remotes) and Yellow (PTO).

Fold Out Radiators

Engine development was focused on optimising the cooling performance and the service and maintenance access. DEUTZ-FAHR is again following the strategy to have the easiest and best service access to the cooling package, which makes daily service much easier and comfortable. The Radiators used in the 6 series TTV are aluminium allowing great thermal dissipation.

S-Matic HD TTV Transmission

The stepless ZF Smatic S240HD transmission stands for those looking for exact speeds to match any application. The TTV transmission of 7 Series combines the efficiency of mechanical components with the comfort and smoothness of a hydrostatic system. This efficient and reliable system is capable of varying speed between 0 and 60 km/h top speed and offers for instance on field work between 7 and 15 km/h in the main operating range between 80% mechanical component and in transport the average will be around 90% mechanical component. With a maximum pulling performances of 136 KN on the HD Version the transmission is capable of handling all heavy conditions.

Hi Output Hydraulics

To guarantee the maximum versatility of the hydraulics, the 7 series TTV are suited to meet a wide possible range of customer demands. Large closed centre hydraulics pumps with up to 160 L/min available. All auxiliary remote valves are electro hydraulic controlled with 4 sets (8 outlets) as standard. Timer and flow control to each valve is done inside the cabin making the use of hydraulic control implements simple and easy. Externally on the rear fender the operator has the ability to control one remote. Power beyond and load sense lines are also standard.


MaxiVision 2 Cabin

The further development of the MaxiVision 2 Cab is proceeding the success in ergonomic and comfort of the time being. It is a functional and comfortable working environment that bears the unmistakable signature of collaboration with Giugiaro. With the new MaxiView Windscreen and the large windows on the side and on the rear of the tractor, the driver has the best overview around the tractor. Thanks to the new design of the bonnet also the area in front of the tractor and the front lift area can be seen very easily. Now the cab is separated from the hood so heat, vibrations and noise are much more reduced, lifting the drivers comfort on a new high class level. The maximum noise in cab is 69dB (A).

German Deutz Engine

The new 7 Series TTV is equipped with a completely redesigned engine in terms of environmental impact and cost-effectiveness. The DEUTZ 6.1 (Tier3) engine is more responsive, offers higher reserve torque and starts with a higher torque and at the same time, consumption of fuel has been reduced by 5 %, compared to the previous generation. The efficiency of the engine is supported by Electronic Visco fan and the redesigned, compact high-performance cooling system from Mahle-Behr. The new and more efficient cooling package on these engines reduces airflow resistance to provide higher cooling capacity. The individual components of the system have been completely new built up by aluminium and ensures a long life time.

50 km/h Speed with Front Axle Suspension

All 7  Series TTV tractor models are equipped with front axle and cabin suspension. The front axle suspension was redesigned from the previous series to allow more movement resulting in better ride and traction results. When front axle suspension is engaged there I +/- 120mm of travel available at all times. Another standard feature is the anti-dive valve and when brakes applied the front axle won’t move. 

Flexible GPS Solutions

As an option the 7 Series TTV tractor can be fitted with the Easy steer Hydraulic valve. Not only does this give you options to plug a GPS systems into but also gives the operator a feature where the steering revolutions form lock to lock can be reduced when system activated. Deutz- Fahr offer in house GPS steering solutions with Trimble powered and TopCon products available. Both systems combine the latest guidance features. For more information visit our Precision Ag section.

Info + Specs